Welcome to SNADI Factory


Common three-point failures of solar controllers in off-grid systems

998 Published by admin 6月 06,2020

Common faults of solar controllers in off-grid systems are mainly divided into the following contents: unable to charge, the charging current is too small, the battery consumes power quickly, and the load cannot work. The following snadi inverter manufacturers will introduce them in detail.

24v48v Charge Controller Supplier

1. The solar panel cannot charge the battery.
1. Confirm whether the solar panel is connected correctly and whether the positive and negative poles are reversed.
2. Whether the solar panel is blocked.
3. Whether the specifications of the solar panel are correct. Whether the open circuit voltage meets the requirements of the controller.
4. Whether the power of the solar panel exceeds the rated system of the controller. Too much power may cause the solar controller to burn out.
5. If the battery is full, the battery is full and the controller enters the floating charging stage, the charging current will become very small.

SCP Solar Controller

Second, the battery power is not enough, and soon no electricity.
1. Whether the battery capacity design is reasonable, the capacity is too small, the use time is naturally short.
2. The battery is aging, the service life of the battery is generally 2-3 years, the capacity of the battery is greatly attenuated, and the battery needs to be replaced regularly.
3. Whether the battery has a short circuit during installation. The capacity of a battery damaged by a short circuit is much reduced.
4. The load power exceeds the design power.

Solar Power System Snadi LCD Controller Manufacturer

Third. The load cannot work
1. Confirm whether the working voltage of the load is consistent with the output voltage of the controller.
2. Is there any short circuit and overload in the load?
3. Is the controller load output manually turned off?
4. Whether the battery voltage is too low or too high leads to controller load protection.

How to configure the power of photovoltaic power plant components and inverters?

In the photovoltaic on grid power generation system, the matching of the power of the photovoltai...

Do you like ? 1,689

Read more

5 points for attention when choosing solar inverter

1. It should have sufficient rated output capacity and load capacity. The selection of solar inve...

Do you like ? 1,307

Read more

Why is the output power of solar inverter not up to the rated power of the module

The output power of solar inverters, and generally it is difficult to reach the standard componen...

Do you like ? 1,357

Read more

How to maintain the solar system photovoltaic power station?

For each photovoltaic power station, a comprehensive and complete technical document file should ...

Do you like ? 1,292

Read more

What is the role of photovoltaic inverter in solar power generation?

Solar power generation is a new field of energy conservation and environmental protection. It is ...

Do you like ? 897

Read more

What are the parameters to be considered for solar pv inverters?

The configuration of the solar inverter should be determined according to the technical specifica...

Do you like ? 1,067

Read more

Maintenance and common faults of pv combiner box

In the solar pv power generation system, the combiner box will be used, also known as the solar c...

Do you like ? 1,191

Read more

Common three-point failures of solar controllers in off-grid systems

Common faults of solar controllers in off-grid systems are mainly divided into the following cont...

Do you like ? 998

Read more
Technical Support: Magic Lamp