Welcome to SNADI Factory
Snadi 30 A solar charge controller
Model: | 012(24/48)030LCD | |
Rated charge current | 30A | |
Rated load current | 20A | |
System voltage | 12V/24V automatic identification ;24/48 automatic identification | |
Input of the photovoltaic module | <25V; *2/24V; *4/48V | |
360WP; *2/24V; *4/48V | ||
No-load loss | <30mA | |
Batteries capacity | Default :400ah(settable between 100 ah to 9000ah) | |
Voltage drop of the charge circuit | ≤0.26V | |
Voltage drop of the discharge circuit | ≤0.15V | |
Over voltage protection | 17V; *2/24V; *4/48V | |
Charge program | 1p | |
Voltage of boosting charge | 14.2V; *2/24V; *4/48V | |
Voltage of direct charge | 14V; *2/24V; *4/48V | |
Voltage of floating charge | 13.8V; *2/24V; *4/48V; | |
Over discharge recovery voltage | 12.7V; *2/24V; *4/48V; | |
Over discharge voltage | 11.1V;*2/24V; *4/48V; | |
Charge mode | PWM (pulse width modulation) | |
Over Voltage protection and short circuit protection | Over load protection upon 1.25 times of the rated current for 60s or 1.5 times of the rated current for 5 s;short circuit protection upon three or more times of the rated current | |
Operating temperature | Industrial level:-35℃~+55℃ | |
Ambient temperature for operation | 0-40℃ | |
Ambient temperature for storage | -15℃~+50℃ | |
Operation/storage condition | 0-90%(no condensation) | |
External size:L*D*H(MM) | 155*145*67 | |
Package size:L*D*H(MM) | 192*180*117 | |
N.W/G.W(KG) | 0.9/1.1 |
24v/48v lcd display 30 A charger controller factory
This 30 a charger controller can realizes solar charge and discharge management for batteries , and make a longer lives and high efficient of systems,it’s from snadi charger controller factory.
This 30 a charger controller can show you more details operation parameter and statuses because of it;s also a LCD controller
This 30 a charger controller is widely applied to the solar power system for families, schools, streets, industrial and mining enterprise , frontier defense, sea island , pasturing areas, etc..
We are charger controller factory for both LCD controller and led controller , including low voltage solar controller and high voltage solar controller. Voltage is available from 12 V to 384 V.
Full automatic control such as electrical short circuit protection , over discharge protection , overload protection, and unique reserve connection prevention.
Snadi 30 A solar charge controller
This solar controller can realizes solar charge and discharge management for batteries , and make a longer lives and high efficient of systems,it’s from snadi charge controller supplier.
This solar controller can show you more details operation parameter and statuses because of it;s also a LCD controller
This solar controller is widely applied to the solar power system for families, schools, streets, industrial and mining enterprise , frontier defense, sea island , pasturing areas, etc..
Excellent performance because of an MCU intelligent control technology
A wide range of applicable loads because of power-frequency transformer
design and pure sine wave AC output
A wide range, high accuracy and full automatic voltage stabilization
Overall protection functions (overload protection, short circuit protection,
over-voltage protection, under voltage protection and over temperature protection)
Simple LEDs and a LCD for visualization of operation status of the equipment
Snadi 30 A solar charge controller
We are controller manufacturer for both LCD controller and led controller , including low voltage solar controller and high voltage solar controller. Voltage is available from 12 V to 384 V.
Full automatic control such as electrical short circuit protection , over discharge protection , overload protection, and unique reserve connection prevention.
Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.